Unlike ordinary radiators, radiators PC series is particularly reliable. By using these heaters, you do not have this problem! Panel profile compact radiators FKO are brilliant varnish, the surface of treated iron phosphate. The paint does not emit environmentally harmful substances. There are radiators, which are best used in a closed heating systems, with good heat dissipation. For a variety of devices available in different types of connections: side, bottom. For example, these radiators kerma are very comfortable. Radiators kermi different variety of design and, moreover, they can be connected to any source. There are other manufacturer radiators, which occupies almost 60% of Russian market of steel radiators.
Their products can be attached directly to a two-pipe and pipe system to the left or right hand side or the bottom plug. These are radiators korado. They provide a uniform heating the entire room, capable of precise temperature control (in the range of 5 degrees). Corado radiators even allow you to adjust humidity. In the U.S., many homes are heated by boilers. Steam Boilers boiler operating at higher temperatures than water.
They are usually not very effective. But the device with high efficiency are readily available. Our company offers heating equipment from different manufacturers: Ferolli, Dakon, Kospel and others. In condensing boilers sovremmenyh 90% of the heat delivered to the consumer, and only 10% is lost. But there are boilers that supplied 95% or even 100% of the heat. For boilers, this nekondensatsionnyh rate is 75-78%. Although condensing ustanoki cost more nekondensatsionnyh, condensation can help save money on fuel over 15-20 years, which is especially wise investment for the cold climate. Convectors Breeze quickly and efficiently heat the room. They create the windows curtains, which is very good as help retain heat in the room, and heat it. Breeze M has a high emissivity. Its heating element is protected by a grid of dyurallyuminiya. The material used to produce coil wagon CSC – steel. As the heating element are using the drawn pipe. This tube can be withstand high pressure. To adjust the temperature, is used flap. This helps to save well as temperature controllers are quite expensive. Convector wagon is available with one or two heating elements. For heating economy class, industrial and warehouse space, you can use a simplified design of convector compared with CSC wagon, but no less powerful and easy. It coil length from 450 to 1365 mm, with a wide mass range (4 to 26 kg) and a variety of nominal heat flux (from 0.3 to 2.2 kW). If you are looking for quality at an affordable price convectors, convector chord – what you need!